..................................................................................................................... 410 x LIST OF TABLES AASHTO (1993). AASHTO Guide for Design of Pavement Structures, 1993. AASHTO Guide for Design of Pavement Structures, AASHTO, Washington, DC. (Chapter III-3) Alduchov, O. A., and Eskridge, R. E. (1996). “Improved Magnus Form Approximation of Saturation Vapor Pressure.” Journal of Applied Meteorology, American Meteorological Society, 35(4), 601-609. Alland, K. and Vandenbossche, J.M. (2017). "Daily Cycles of Temperature-Independent Curvature in Jointed Plain Concrete Pavements" Journal of Transportation Engineering, Part A: Systems, American Society of Civil Engineers, 143(8) DOI: 04017034. Allen, R. G., Walter, I. A., Elliott, R., Howell, T., Itenfisu, D., and Jensen, M. (2005). The ASCE Standardized Reference Evapotranspiration Equation. American Society of Civil Engineers, Reston, VA. Applied Pavement Technology (2001). PCC Pavement Evaluation and Rehabilitation Reference Manual. Federal Highway Administration, McLean, VA. (Module 2-3) 2-3.1-2-3.30. ARA Inc. (2004). Guide for Mechanistic-Empirical Design of New and Rehabilitated Pavement Structures. NCHRP 1-37A. National Cooperative Highway Research Program, Washington, DC. (Part 3) 3.4.37. Asbahan, R, and Vandenbossche, J.M. (2011). "Effects of Temperature and Moisture Gradients on Slab Deformation for Jointed Plain Concrete Pavements." Journal of Transportation Engineering, American Society of Civil Engineers,163(8), 563-570. Bayrak, M. B., and Ceylan, H. (2007). “Effect of slab curling and warping on pavement layer backcalculation.” (Presentation) Falling Weight Deflectometer (FWD) User's Group Conference. Ames, IA. Bayrak, M. B., and Ceylan, H. (2009). “Neural Network-Based .Approach for Analysis of Rigid Pavement Systems Using Deflection Data.” Transportation Research Record, Transportation Research Board, 2068(1), 61-70. Bentz, D. P. (2000). A Computer Model to Predict The Surface Temperature and Time-of Wetness of Concrete Pavements and Bridge Decks. National Institute of Standards and Technology, Gaithersburg, MD. 1-19. Bhattacharya, B. B., Raghunathan, D., Selezneva, O., Wilke, P., Darter, M. I., and Von Quintus, H. L. (2017). PennDOT Pavement ME Design Preliminary User Input Guide (Draft Report). Pennsylvania Department of Transportation, Harrisburg, PA. 1-136. Brill, D., Flynn, R., and Pecht, F. (2007). FAA Rigid Pavement Instrumentation at Atlanta Hartsfield-Jackson International Airport. FAA Airport Technology R&D Branch, Atlantic City, New Jersey. Buch, N., and Zollinger, D. G. (1996). “Development of Dowel Looseness Prediction Model for Jointed Concrete Pavements.” Transportation Research Record, Transportation Research Board, 1525 (1), 21-27. Burnham, T. R. (2001). Construction Report for Mn/ROAD PCC Test Cells 32, 52 and 53. Minnesota Department of Transportation, Office of Research Services, St. Paul, MN. 1-121 Byrum, C., Kohn, S., Gemayel, C., Tayabji, S., Barton, P., Ye, D., Rollings, R., Ioannides, A., and Perera, R. (2011). Joint Load Transfer in Concrete Airfield Pavements: Final Report. Federal Aviation Administration, Innovative Pavement Research Foundation, Rosemont, IL. (Chapter 5) 131-164. Chapin, L. T., and White, T. D. (1993). “Validating Loss of Support for Concrete Pavements.” Fifth International Conference on Concrete Pavement Design and Rehabilitation [Proceedings], West Lafayette, IN. 163-193. Crovetti, J. A. (1994). Design and Evaluation of Jointed Concrete Pavement Systems Incorporating Open-Graded Permeable Bases (Doctoral Dissertation). University of Illinois. Urbana-Champaign, IL. (Chapter 6) 127-177 Crovetti, J. A., and Darter, M. I. (1985). “Void Detection for Jointed Concrete Pavements.” Transportation Research Record, Transportation Research Board, 1041(1), 59-68. Darter, M. I., Barenberg, E. J., and Yrjanson, W. A. (1985). NCHRP Report 281: Joint Repair Methods for Portland Cement Concrete Pavements. National Cooperative Highway Research Program. Washington, DC. (Chapter 4-3) 39-47. Darter, M. I., Becker, J. M., and Snyder, M. B. (1984). Concrete Pavement Evaluation System (COPES). University of Illinois, Urbana-Champaign, IL. (Chapter 3) 12-24. Davids, W. G. (1998). Modeling of Rigid Pavements: Joint Shear Transfer Mechanisms and Finite Element Solution Strategies (Doctoral Dissertation). University of Washington, Seattle, WA. (Chapters 3-8) 27-180. Davids, W. G. (2000). “Effect of Dowel Looseness on Response of Jointed Concrete Pavements.” Journal of Transportation Engineering, American Society of Civil Engineers, 126(1), 50- 57. Davids, W. G. (2003). “EverFE Theory Manual, Version 2. 24.” Computer Software. DeSantis, J., Sachs, S., Vandenbossche J. (In Print). “Faulting Mechanisms in Concrete Pavements and Overlays. International Journal of Pavement Engineering. Chinese Society of Civil Engineers. Dempsey, B. J., Hierlache, W. A., and Patel, A. J. (1986). “Climatic-Materials-Structural Pavement Analysis Program.” Transportation Research Record, Transportation Research Board, (1095), 111-123. Diamond, H. J., Karl, T. R., Palecki, M. A., Baker, C. B., Bell, J. E., Leeper, R. D., Easterling, D. R., Lawrimore, J. H., Meyers, T. P., and Helfert, M. R. (2013). “US Climate Reference Network After One Decade of Operations: Status and Assessment.” Bulletin of the American Meteorological Society, American Meteorological Society, 94(4), 485-498. Dupont, W. D. (2009). Statistical Modeling for Biomedical Researchers: A Simple Introduction to the Analysis of Complex Data. Cambridge University Press. Chapter 11, 248-260. Elkins, G., Schmalzer, P., Thompson, T., and Simpson, A. (2003). FHWA-RD-03-088: Long-Term Pavement Performance Information Management System Pavement Performance Database User Reference Guide. Federal Highway Administration, McLean, VA. 1-171. FHWA. (2017). “Long Term Pavement Performance Database.” (Jan. 1, 2017). Friberg, B. F. (1940). “Design of Dowels in Transverse Joints of Concrete Pavements.” Transactions, American Society of Civil Engineers, American Society of Civil Engineers 105(2081), 1076-1095. Geiger, R., Aron, R. H., and Todhunter, P. (1950). The Climate Near the Ground. Rowman & Littlefield. (Part I) 2-46. Gelaro, R., McCarty, W., Suárez, M. J., Todling, R., Molod, A., Takacs, L., Randles, C. A., Darmenov, A., Bosilovich, M. G., Reichle, R., Wargan, K., Coy, L., Cullather, R., Draper, C., Akella, S., Buchard, V., Conaty, A., da Silva, A. M., Gu, W., Kim, G. K., Koster, R., Lucchesi, R., Merkova, D., Nielsen, J. E., Partyka, G., Pawson, S., Putman, W., Rienecker, M., Schubert, S. D., Sienkiewicz, M., and Zhao, B. (2017). “The Modern-Era Retrospective Analysis for Research and Applications, Version 2 (MERRA-2).” Journal of Climate, American Meteorological Society, 30(14), 5419-5454. Giam, X., and Olden, J. D. (2015). “A New R2-based Metric to Shed Greater Insight on Variable Importance in Artificial Neural Networks.” Ecological Modeling, Elsevier Inc, 313, 307-313. GMAO. (2015). “MERRA-2 tavg1_2d_slv_Nx: 2d,1-Hourly, Time-Averaged, Single Level, Assimilation, Single-Level Diagnostics V5.12.4.” Goddard Earth Sciences Data and Information Services Center (GES DISC), Greenbelt, MD. Guo, H. (1992). Mathematical Modeling for Dowel Load Transfer Systems (Doctoral Dissertation). Michigan State University, East Lansing, MI. (Chapters 4-5) 62-117. Guo, H., Sherwood, J. A., and Snyder, M. B. (1995). “Component Dowel-Bar Model for Load Transfer Systems in PCC Pavements.” Journal of Transportation Engineering, American Society of Civil Engineers 121(3), 289-298. Hall, K.T. (1992). Backcalculation Solutions for Concrete Pavements. Technical Memo Prepared for SHRP Contract P-020, "Long Term Pavement Performance Analysis." Transportation Research Board, Washington, DC. Hastie, T., Tibshirani, R., and Friedman, J. (2009). The Elements of Statistical Learning. Springer, New York, NY. (Chapter 11) 389-415. Heilman, R. H. (1929). “Surface Heat Transmission.” Transactions of the Society of Mechanical Engineers, Society of Mechanical Engineers, 51(1), 287-302. Horel, J., Splitt, M., Dunn, L., Pechmann, J., White, B., Ciliberti, C., Lazarus, S., Slemmer, J., Zaff, D., and Burks, J. (2002). “Mesowest: Cooperative Mesonets in the Western United States.” Bulletin of the American Meteorological Society, American Meteorological Society, 83(2), 211-225. Ioannides, A., Barenberg, E., and Lary, J. (1989). “Interpretation of Falling Weight Deflectometer Results Using Principles of Dimensional Analysis.” 4th International Conference on Concrete Pavement Design and Rehabilitation [Proceedings], West Lafayette, IN. 231 247. Janssen, D.J. (1987). "Moisture in Portland Cement Concrete." Transportation Research Record, Transportation Research Board, 1121(1), 40-44. Janssen, D. J., and Snyder, M. B. (2000). “Temperature-Moment Concept for Evaluating Pavement Temperature Data.” Journal of Infrastructure Systems, American Society of Civil Engineers, 6(2), 81-83. Jeong, J., Lee, J., Suh, Y.-C., and Zollinger, D. (2006). “Effect of Slab Curling on Movement and Load Transfer Capacity of Saw-Cut Joints.” Transportation Research Record, Transportation Research Board, 1947(1), 69-78. Johanneck, L., Tompkins, D., and Khazanovich, L. (2010). Design and Construction Guidelines for Thermally Insulated Concrete Pavements: Task 3. Minnesota Department of Transportation, St. Paul, MN. 25-54. Khazanovich, L., and Gotlif, A. (2003). Evaluation of Joint and Crack Load Transfer Final Report. Federal Highway Administration, McLean, VA. 1-110. Khazanovich, L., Hoegh, K., and Snyder, M. (2008). NCHRP Report 637: Guidelines for Dowel Alignment in Concrete Pavements. National Cooperative Highway Research Program, Washington, DC. (Appendix D) D2-D47. Khazanovich, L., and Roesler, J. (1997). “DIPLOBACK: Neural-Network-Based Backcalculation Program for Composite Pavements.” Transportation Research Record, Transportation Research Board, 1570(1), 143-150. Khazanovich, L., Tayabji, S. D., and Darter, M. I. (2001). Backcalculation of Layer Parameters for LTPP Test Sections, Volume I: Slab on Elastic Solid and Slab on Dense-Liquid Foundation Analysis of Rigid Pavements. Federal Highway Administration, McLean, VA. 3-89. Korenev, B. G. (1954). “Problems of Analysis of Beams and Plates on Elastic Foundation”. Gosudarstvennoe Izdatel'stvo Literatury po Stroitel'stvu i Arkhitekture, Moscow, USSR. Larralde, J. S. (1984). Structural Analysis of Rigid Pavement with Pumping (Doctoral Dissertation). Purdue University, West Lafayette, IN. (Chapter 5) 74-116. LeVeque, R. J. (2007). Finite Difference Methods for Ordinary and Partial Differential Equations. Society for Industrial and Applied Mathematics, Philadelphia, PA. (Chapter 5) 113-145. Lukanen, E. O., Stubstad, R., and Briggs, R. (2000). Temperature Predictions and Adjustment Factors for Asphalt Pavement. FHWA-RD-98-085. Federal Highway Administration, Washington, DC. (Chapter 4) 21-27. Lytton, R. L., Tsai, F.-L., Lee, S. I., Luo, R., Hu, S., and Zhou, F. (2010). Models for Predicting Reflection Cracking of Hot-Mix Asphalt Overlays. NCHRP Report 669. National Cooperative Highway Research Program, Washington, DC. (Chapter 3) 48-56. MacKay, D. J. C. (1992). “A Practical Bayesian Framework for Backpropagation Networks.” Neural Computation, Massachusetts Institute of Technology Press Journals, 4(3), 448-472. Mackiewicz, P. (2015). “Finite-Element Analysis of Stress Concentration around Dowel Bars in Jointed Plain Concrete Pavement.” Journal of Transportation Engineering, American Society of Civil Engineers, 141(1993), 1-8. Maitra, S. R., Reddy, K. S., and Ramachandra, L. S. (2009). “Experimental Evaluation of Interface Friction and Study of Influence on Concrete Pavement Response.” Journal of Transportation Engineering, American Society of Civil Engineers, 135(8), 563-572. Mannarano, D. (1998). Automated Surface Observing System (ASOS) User's Guide. National Oceanic and Atmospheric Administration, Washington, DC. 1-74. < https://www.weather.gov/media/asos/aum-toc.pdf> McCullough, B. F., and Rasmussen, R. O. (1999). Fast Track Paving: Concrete Temperature Control and Traffic Opening Criteria for Bonded Concrete Overlays Volume I -Final Report. HIPPERPAV User's Manual, Federal Highway Administration, McLean, VA. (Chapter 4) 53-101. Meeus, J. H. (1991). Astronomical Algorithms. Willmann-Bell, Incorporated, Richmond, VA. (Chapter 15) 101-105. Mesinger, F., DiMego, G., Kalnay, E., Mitchell, K., Shafran, P. C., Ebisuzaki, W., Jović, D., Woollen, J., Rogers, E., Berbery, E. H., Ek, M. B., Fan, Y., Grumbine, R., Higgins, W., Li, H., Lin, Y., Manikin, G., Parrish, D., and Shi, W. (2006). “North American Regional Reanalysis.” Bulletin of the American Meteorological Society, American Meteorological Society, 87(3), 343-360. MoDOT. (2013). “Void Detection and Undersealing Verification Testing of Concrete Pavement with a Falling Weight Deflectometer.” Missouri Department of Transportation Engineering Policy Guide, (Jan. 7, 2016). Nassiri, S. and Vandenbossche, J.M. (2012). “Establishing Built-In Temperature Gradient for Jointed Plain Concrete Pavements in Pennsylvania.” International Journal of Pavement Research and Technology, Chinese Society of Pavement Engineering, 5(4), 245-256. Nassiri, S. (2011). Establishing Permanent Curl/Warp Temperature Gradient in Jointed Plain Concrete Pavements (Doctoral Dissertation). University of Pittsburgh, Pittsburgh, PA. (Chapters 4-5) 174-199. Nishizawa, T., Fukuda, T., and Matsuno, S. (1989). “A Refined Model of Doweled Joints for Concrete Pavement Using FEM Analysis.” International Conference on Concrete Pavement Design and Rehabilitation [Proceedings], West Lafayette, IN. 735-745. “NOAA Solar Calculator.” (n.d.). Earth Science Research Laboratory, (Jan. 1, 2017). Oke, T. R. (2002). Boundary Layer Climates. Routledge London, England and New York, NY. (Appendix A.2) 358-364. PennDOT. (2011). Publication 408/2011 Specifications. Pennsylvania Department of Transportation, Harrisburg, PA. (Section 5:Concrete Pavements) Prabhu, M., Varma, A., and Buch, N. (2009). “Analytical Investigation of the Effects of Dowel Misalignement on Concrete Pavement Joint Opening Behavior.” International Journal of Pavement Engineering, Elsevier, Inc. 10(1), 49-62. Qin, Y., and Hiller, J. E. (2011a). “Modeling Temperature Distribution in Rigid Pavement Slabs: Impact of Air Temperature.” Construction and Building Materials, Elsevier Ltd, 25(9), 3753-3761. Qin, Y., and Hiller, J. E. (2011b). “Modeling the Temperature and Stress Distributions in Rigid Pavements: Impact of Solar Radiation Absorption and Heat History Development.” KSCE Journal of Civil Engineering, Korean Society of Civil Engineers, 15(8), 1361-1371. Rao, S., and Roesler, J. R. (2005). “Nondestructive Testing of Concrete Pavements for Characterization of Effective Built-in Curling.” Journal of Testing and Evaluation, ASTM International, 33(5), 356-363. Rohne, J. (2009). Sixty-Year Design Concrete Pavement-Performance Model Development: MnROAD Cell 53 Construction Report. Minnesota Department of Transportation, St. Paul, MN. 1-29. Rienecker, M. M., Suarez, M. J., Gelaro, R., Todling, R., Bacmeister, J., Liu, E., Bosilovich, M. G., Schubert, S. D., Takacs, L., Kim, G. K., Bloom, S., Chen, J., Collins, D., Conaty, A., Da Silva, A., Gu, W., Joiner, J., Koster, R. D., Lucchesi, R., Molod, A., Owens, T., Pawson, S., Pegion, P., Redder, C. R., Reichle, R., Robertson, F. R., Ruddick, A. G., Sienkiewicz, M., and Woollen, J. (2011). “MERRA: NASA's Modern-Era Retrospective Analysis for Research and Applications.” Journal of Climate, American Meteorological Society, 24(14), 3624-3648. Royston, P. (1992). “Lowess Smoothing.” Stata Technical Bulletin, StataCorp LP, 1(3). Ruiz, J. M., Kim, P. J., Schindler, A. K., and Rasmussen, R. O. (2001). “Validation of HIPERPAV for Prediction of Early-Age Jointed Concrete Pavement.” Transportation Research Record, Transportation Research Board, 1778(1), 17-25. Ruiz, J. M., Rasmussen, R. O., Chang, G. K., and Dick, J. C. (2004). Computer-Based Guidelines for Concrete Pavements Volume III—Technical Appendices. Federal Highway Administration, McLean, VA. (Appendix E), 299-322. Sachs, S. (2016). Development of a Joint Faulting Model for Unbonded Concrete Overlays of Existing Concrete Pavements Through a Laboratory and Numerical Analysis (Doctoral Dissertation). University of Pittsburgh, Pittsburgh, PA. (Chapter 5.5) 116-121. Sachs, S., Vandenbossche, J.M., and Snyder, M.B. (2015). “Calibration of National Rigid Pavement Performance Models for the Pavement Mechanistic-Empirical Design Guide.” Transportation Research Record, Transportation Research Board, 2524(1), 59-67. Schindler, A. K. (2004). “Effect of Temperature on Hydration of Cementitious Materials.” ACI Materials Journal, American Concrete Institute, 101(1), 72-81. Schmalzer, P. N. (2011). Long-Term Pavement Performance Program Manual for Falling Weight Deflectometer Measurements. Federal Highway Administration, McLean, VA. 1-79. De Schutter, G., and Taerwe, L. (1995). “Specific Heat and Thermal Diffusivity of Hardening Concrete.” Magazine of Concrete Research, ICE Publishing, 47(172), 203-208. Schwartz, C. W., Forman, B. A., and Leininger, C. W. (2015). “Alternative Source of Climate Data for MechanisticEmpirical Pavement Performance Prediction.” Transportation Research Record, Transportation Research Board, 2524 (1), 83-91. Sengupta, M., Habte, A., Gotseff, P., Weekley, A., Lopez, A., Anderberg, M., Molling, C., and Heidinger, A. (2014). “Physics-Based GOES Product for Use in NREL's National Solar Radiation Database.” European Photovoltaic Solar Energy Conference and Exhibition [Proceedings], Amsterdam, The Netherlands. NREL/CP-5D00-62776. Snyder, M. B. (1989). Dowel Load Transfer Systems for Full-Depth Repairs of Jointed Portland Cement Concrete Pavements (Doctoral Dissertation). University of Illinois, Urbana Champaign, IL. (Chapter 4) 124-190. Teller, L. W., and Cashell, H. D. (1959). “Performance of Doweled Joints Under Repetitive Loading.” Highway Research Board Bulletin, Highway Research Board, (217), 8-49. Titus-Glover, L., Bhattacharya, B. B., Raghunathan, D., Mallela, J., and Lytton, R. L. (2016). “Adaptation of NCHRP Project 1-41 Reflection Cracking Models for Semi-Rigid Pavement Design in AASHTOWare Pavement ME Design.” Transportation Research Record, Transportation Research Board, 2590(1), 122-131. Titus-Glover, L., Owusu-Antwi, E. B., and Darter, M. I. (1999). Design and Construction of PCC Pavements, Volume III: Improved PCC Performance Models. Federal Highway Administration, McLean, VA. (Chapter 4), 15-49. Vandenbossche, J.M. (2001). “The Measured Response of Ultra-Thin and Thin Whitetopping to Environmental Loads.” 7th International Conference on Concrete Pavements [Proceedings], Orlando, FL. 807-823. Vandenbossche, J.M. (2007). “Effects of Slab Temperature Profiles on Use of Falling Weight Deflectometer Data to Monitor Joint Performance and Detect Voids.” Transportation Research Record, Transportation Research Board, 2005(1), 75-85. Vandenbossche, J.M. (2017). "Full-scale Testing of the Performance of 1.5 in Dia. Epoxy Coated Dowel Bars in the Accelerated Loading Frame, (Unpublished)" University of Pittsburgh, Pittsburgh, PA. Vandenbossche, J.M. (2003). Interpreting Falling weight Deflectometer Results for Curled and Warped Portland Cement Concrete Pavements (Doctoral Dissertation). University of Minnesota, Minneapolis, MN. (Chapter 3-5) 55-114. 418 Vandenbossche, J.M., and Snyder, M. B. (2004). “Interpreting the Effects of Curled / Warped Pavements on the Analysis of FWD Data.” The 5th International CROW Workshop on Fundamental Modeling of the Design and Performance of Concrete Pavements [Proceedings], CROW Technology Center of the Netherlands, Istanbul, Turkey. (CD ROM) Vanwijk, B. A. J., Larralde, J., Lovell, C. W., and Chen, W. F. (1989). “Pumping Prediction Model for Highway Concrete Pavements.” Journal of Transportation Engineering, American Society of Civil Engineers, 115(2), 161-175. Vehrencamp, J. E. (1953). “Experimental Investigation of Heat Transfer at an Air Earth Interface.” Eos, Transactions American Geophysical Union, Wiley Online Library, 34(1), 22-30. Walton, G. N. (1983). Thermal Analysis Research Program Reference Manual. United States Department of Commerce. (Chapter I) 71-79. Wang, D., Roesler, J. R., and Guo, D.-Z. (2009). “Analytical Approach to Predicting Temperature Fields in Multilayered Pavement Systems.” Journal of Engineering Mechanics, American Society of Civil Engineers, 135(4), 334-344. Wells, S. A., Phillips, B. M., and Vandenbossche, J. M. (2005). SR-22 Smart Pavement Phase I: Early-Age Material Properties and Pavement Response Characteristics for Jointed Plain Concrete Pavements, Phase I Final Report. Pennsylvania Department of Transportation and the Federal Highway Administration. Harrisburg, PA. 1-165. Wells, S. A., Phillips, B. M., and Vandenbossche, J. M. (2006). “Characterizing Strain Induced by Environmental Loads in Jointed Plain Concrete Pavements Immediately After Paving and Throughout First 10 Months.” Transportation Research Record, Transportation Research Board, 1947(1), 36-48. Wu, C. L., Mack, J. W., Okamoto, P. A., and Packard, R. G. (1993). “Prediction of Faulting of Joints in Concrete Pavements.” Fifth International Conference on Concrete Pavement Design and Rehabilitation [Proceedings]. 53-70. Ye, D. (2017). “Comparing Best-Fit Backcalculation Approach Incorporating Curling to Conventional Backcalculation Methods for JPCP Sections of LTPP Seasonal Monitoring Program Study.” Transportation Research Board Annual Meeting [Compendium of Papers], Washington, DC. Yu, H. T., Smith, K. D., Darter, M. I., Jiang, J., and Khazanovich, L. (1998). Performance of Concrete Pavements. Volume III: Improving Concrete Pavement Performance. Federal Highway Administration, McLean, VA. 7-34. Zeger, S. L., Liang, K.-Y., and Albert, P. S. (1988). “Models for Longitudinal Data: a Generalized Estimating Equation Approach.” Biometrics, JSTOR, 1049-1060. 420