Link to the University of Pittsburgh Homepage
Link to the University Library System Homepage Link to the Contact Us Form

A Method for Quantitative Real-Time Evaluation of Measurement Reliability When Using Atomic Force Microscopy-Based Metrology

Gujrati, Abhijeet and Khanal, Subarna R. and Jacobs, Tevis D. B. (2017) A Method for Quantitative Real-Time Evaluation of Measurement Reliability When Using Atomic Force Microscopy-Based Metrology. IEEE Nano, 2017 IEEE 17th International Conference on Nanotechnology. pp. 135-138. ISSN 1944-9380

[img]
Preview
PDF
Download (497kB) | Preview

Abstract

In atomic force microscopy (AFM) and metrology, it is known that the radius of the scanning tip affects the accuracy of the measurement. However, most techniques for ascertaining tip radius require interruption of the measurement technique to insert a reference standard or to otherwise image the tip. Here we propose an inline technique based on analysis of the power spectral density (PSD) of the topography that is being collected during measurement. By identifying and quantifying artifacts that are known to arise in the power spectrum due to tip blunting, the PSD itself can be used to determine progressive shifts in the radius of the tip. Specifically, using AFM images of an ultrananocrystalline diamond, various trends in measured PSD are demonstrated. First, using more than 200 different measurements of the same material, the variability in the measured PSD is demonstrated. Second, using progressive scans under the same conditions, a systematic shifting of the mid-to-high-frequency data is visible. Third, using three different PSDs, the changes in radii between them were quantitatively determined and compared to transmission electron microscopy (TEM) images of the tips taken immediately after use. The fractional changes in tip radii were detected; the absolute values of the tip radii could be matched between the two techniques, but only with careful selection of a fitting constant. Further work is required to determine the generalizability of the value of this constant. Overall, the proposed approach represents a step towards quantitative and inline determination of the radius of the scanning tip and thus of the reliability of AFM-based measurements.


Share

Citation/Export:
Social Networking:
Share |

Details

Item Type: Article
Status: Published
Creators/Authors:
CreatorsEmailPitt UsernameORCID
Gujrati, Abhijeetabg30@pitt.eduabg30
Khanal, Subarna R.srk68@pitt.edusrk68
Jacobs, Tevis D. B.tjacobs@pitt.edutjacobs0000-0001-8576-914X
Date: 25 July 2017
Date Type: Publication
Journal or Publication Title: IEEE Nano, 2017 IEEE 17th International Conference on Nanotechnology
Publisher: IEEE
Page Range: pp. 135-138
DOI or Unique Handle: 10.1109/nano.2017.8117292
Schools and Programs: Swanson School of Engineering > Mechanical Engineering and Materials Science
Refereed: Yes
ISSN: 1944-9380
Article Type: Research Article
Date Deposited: 16 Aug 2018 14:07
Last Modified: 16 Aug 2018 14:07
URI: http://d-scholarship.pitt.edu/id/eprint/34968

Metrics

Monthly Views for the past 3 years

Plum Analytics

Altmetric.com


Actions (login required)

View Item View Item