Pitt Logo LinkContact Us

Items where Division is "Swanson School of Engineering > Mechanical Engineering" and Year is University of Pittsburgh ETD

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Date | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | Y | Z
Number of items: 143.

A

Agosti, Christopher D. (2006) VISCOELASTIC CHARACTERIZATION OF RABBIT NUCLEUS PULPOSUS TISSUE IN TORSIONAL CREEP. Master's Thesis, University of Pittsburgh.

Al-aqal, Osama M.A (2003) Heat TRANSFER DISTRIBUTIONS ON THE WALLS OF A NARROW CHANNEL WITH JET IMPINGEMENT AND CROSS FLOW. Doctoral Dissertation, University of Pittsburgh.

Allazadeh, Mohammad Reza (2009) The Effect of Cooling Rate on the Microstructure Configuration of Continuously Cast Steel Slabs. Doctoral Dissertation, University of Pittsburgh.

Ansari, Naseem (2012) Filtered Density Function for Large Eddy Simulation of Turbulent Reacting Flows on Unstructured Meshes. Doctoral Dissertation, University of Pittsburgh.

Avdeev, Ilya V (2004) New Formulation for Finite Element Modeling Electrostatically DrivenMicroelectromechanical Systems. Doctoral Dissertation, University of Pittsburgh.

Ayhan, Ahmet Fatih (2002) DESIGN OF A PIEZOELECTRICALLY ACTUATED MICROVALVE FOR FLOW CONTROL IN FUEL CELLS. Master's Thesis, University of Pittsburgh.

B

Bagatti, Timothy James (2010) Development and Characterization of an Aeroelastic Instability Energy Harvester. Master's Thesis, University of Pittsburgh.

Bao, Jie (2010) High Density Ratio Multi-Component Lattice Boltzmann Flow Model for Fluid Dynamics and CUDA Parallel Computation. Doctoral Dissertation, University of Pittsburgh.

Bataineh, Khaled (2006) Development of Precision TEM Holder Assemblies for Use in Extreme Environments. Doctoral Dissertation, University of Pittsburgh.

Beblo, Richard Vincent (2010) Characterization and Modeling of Light Activated Shape Memory Polymer. Doctoral Dissertation, University of Pittsburgh.

Bisnette, Jesse Bennett (2004) Active Noise Control Using Modally Tuned Phase-Compensated Filters. Master's Thesis, University of Pittsburgh.

Black, Nathaniel Benjamen (2008) Active Combustion Throttle. Master's Thesis, University of Pittsburgh.

Boyerinas, Brad Michael (2009) Design and Fabrication of a Variable Stiffness Link for Use in a Morphable Unmanned Air Vehicle. Master's Thesis, University of Pittsburgh.

Briggs, Alan L. (2004) Transient Conjugate Heat Transfer in a Circular Duct for Power-Law Fluid with Viscous Dissipation. Doctoral Dissertation, University of Pittsburgh.

Brown, Brandon (2013) Effect of Lesser Tuberosity Osteotomy Size and Repair Construct During Total Shoulder Arthroplasty. Master's Thesis, University of Pittsburgh.

Brush, Raymond Eugene (2004) MELTING TEMPERATURES AND THERMAL CONDUCTIVITIES OF POSSIBLE SUBSTRATES FOR THREE-DIMENSIONAL CONDUCTIVE INK JET PRINTING. Master's Thesis, University of Pittsburgh.

Bucci, Brian Arthur (2008) Development of artificial neural network-based classifiers to identify military impulse noise. Master's Thesis, University of Pittsburgh.

Bucci, Brian Arthur (2011) A Practical Method for Friction Compensation in Rapid Point-to-Point Motion. Doctoral Dissertation, University of Pittsburgh.

C

Charnegie, David (2007) Frequency Tuning Concepts For Piezoelectric Cantilever Beams And Plates For Energy Harvesting. Master's Thesis, University of Pittsburgh.

Chen, Qian (2012) Nanowire and Fiber Composite Electromechanical Sensor. Doctoral Dissertation, University of Pittsburgh.

Chen, Qingming (2006) Fabrication and characterization of AlN thin film bulk acoustic wave resonator. Doctoral Dissertation, University of Pittsburgh.

Chen, Shuping (2009) Film Cooling Enhancement with Surface Restructure. Doctoral Dissertation, University of Pittsburgh.

Cheng, Hongbin (2010) FABRICATION OF ZINC OXIDE MICRO-NANOSTRUCTURES AND THEIR APPLICATIONS IN GAS SENSING AND NANOCOMPOSITES. Doctoral Dissertation, University of Pittsburgh.

Chung, Bong Jae (2004) Studies of Blood Flow in Arterial Bifurcations; from Influence of Hemodynamics on Endothelial Cell Response to Vessel Wall Mechanics. Doctoral Dissertation, University of Pittsburgh.

Chung, Sang Kug (2011) Micro-Object Manipulation Using Oscillating Bubbles. Doctoral Dissertation, University of Pittsburgh.

Cisloiu, Roxana (2006) A STABILIZED FINITE ELEMENT FORMULATION FOR FINITE STRAIN DEFORMATION. Doctoral Dissertation, University of Pittsburgh.

D

De Bellis, Alice Cleveland (2002) COMPUTER MODELING OF SINTERING IN CERAMICS. Master's Thesis, University of Pittsburgh.

De Vita, Raffaella (2003) Modeling Bovine Pericardium. Master's Thesis, University of Pittsburgh.

De Vita, Raffaella (2005) Structural Constitutive Models for Knee Ligaments. Doctoral Dissertation, University of Pittsburgh.

DeBlois, Justin C. (2014) Building Energy Modeling for Green Architecture and Intelligent Dashboard Applications. Doctoral Dissertation, University of Pittsburgh.

Delaney, Mark Patrick (2010) Experimental Characterization And Multi-Scale Modeling of Electroplastic Elastomers. Master's Thesis, University of Pittsburgh.

Deshmukh, Pushkarraj Vasant (2008) DESIGN AND DEVELOPMENT OF AN ENVIRONMENTAL CELL FOR DYNAMIC IN SITU OBSERVATION OF GAS-SOLID REACTIONS AT ELEVATED TEMPERATURES. Doctoral Dissertation, University of Pittsburgh.

Dmuchoski, Michael P. (2002) Design Issues in Electromechanical Filters with Piezoelectric Transducers. Master's Thesis, University of Pittsburgh.

Drozda, Tomasz Grzegorz (2006) Implementation of LES/SFMDF for Prediction of Non-premixed Turbulent Flames. Doctoral Dissertation, University of Pittsburgh.

Durka, Michael/MJD (2014) A Computational Parametric Study of the Relationship between the Characteristic Geometry, Flow Structure, and Hemodynamics of Intracranial Bifurcation Aneurysms. Master's Thesis, University of Pittsburgh.

E

Eastman, Andrew S (2014) Characterizing Thrust Performance for Free and Confined Oscillating Cantilevers. Doctoral Dissertation, University of Pittsburgh.

Eastman, Andrew S (2013) Heat Transfer and Flow Analysis of a Novel Low Flow Piezoelectric Air Pump. Master's Thesis, University of Pittsburgh.

Ennis, Brian Michael (2006) A 3-D COMPUTER MODEL TO SIMULATE THE SINTERING OF A RANDOMLY PACKED GREEN COMPACT IN ORDER TO INVESTIGATE THE EVOLUTION OF THE MICROSTRUCTURE. Doctoral Dissertation, University of Pittsburgh.

Ennis, Brian Michael (2002) SUPER HARDENING OF W/NbN NANOLAYERS UNDER SHALLOW NANOINDENTATION. Master's Thesis, University of Pittsburgh.

F

Flamm, Angela M. (2004) Preliminary Feasibility Study of Silicon on Insulator (SOI) Microphones. Master's Thesis, University of Pittsburgh.

Frederick, Amanda Allison (2006) Analysis and Fabrication of MEMS Tunable Piezoelectric Resonators. Master's Thesis, University of Pittsburgh.

Freeman, Eric (2010) Applications of Biologically Inspired Membranes. Master's Thesis, University of Pittsburgh.

Freeman, Eric (2012) Harnessing Protein Transport Principles for Engineering Applications: A Computational Study. Doctoral Dissertation, University of Pittsburgh.

Fu, Yao (2013) On Determining Continuum Quantities of Non-Equilibrium Processes via Molecular Dynamics Simulations. Doctoral Dissertation, University of Pittsburgh.

G

Galik, Karol (2002) The effect of design variations on stresses in total ankle arthroplasty. Doctoral Dissertation, University of Pittsburgh.

Gambogi III, Louis Lawrence (2003) Open Coil Box Annealed Steel Cooling Analysis. Master's Thesis, University of Pittsburgh.

Ganmol, Pavin (2011) Heat Transfer in a Two-Pass Channel with Vortex Generators. Doctoral Dissertation, University of Pittsburgh.

Gao, Fei (2010) Computational Study of Ionic Polymers: Multiscale Stiffness Predictions and Modeling of the Electromechanical Transduction. Doctoral Dissertation, University of Pittsburgh.

Giri, Ashutosh (2012) Molecular Dynamics Simulations of the Mechanical Deformation of Nanoporous Gold. Master's Thesis, University of Pittsburgh.

Gross, Korey Edward (2009) MECHANICAL CHARACTERIZATION OF SHAPE MEMORY POLYMERS TO ASSESS CANDIDACY AS MORPHING AIRCRAFT SKIN. Master's Thesis, University of Pittsburgh.

Guido, Michael Robert (2006) Conductive Trace Design in 3-D Circuit Architectures: Heat Transfer Analysis and Experiments. Doctoral Dissertation, University of Pittsburgh.

H

Hahn, Adam (2004) MODELING AND CONTROL OF SOLID OXIDE FUEL CELL - GAS TURBINE POWERPLANT SYSTEMS. Master's Thesis, University of Pittsburgh.

Haji-Sheikhi, Mohammad-Reza (2006) Joint Velocity Scalar Filtered Density Function for Large Eddy Simulation of Turbulent Reacting Flows. Doctoral Dissertation, University of Pittsburgh.

Haljasmaa, Igor V. (2006) On the drag of fluid and solid particles freely moving in a continuous medium. Doctoral Dissertation, University of Pittsburgh.

Han, Lu (2013) Thermal stress analysis of fuel element in particle bed reactor. Master's Thesis, University of Pittsburgh.

Heston, Stephen F (2005) Linear Quadrupole Focusing for High Resolution Microdroplet-Based Fabrication. Master's Thesis, University of Pittsburgh.

Hill, Sarajane Anita (2007) BIOMECHANICAL EFFECTS OF RADIAL OPTIC NEUROTOMY. Master's Thesis, University of Pittsburgh.

Hilliard, Elias Todd (2011) Fabrication and Testing of a Micro-scalable pH Sensor for Implanted Biomedical Use. Master's Thesis, University of Pittsburgh.

Homer, John Patrick (2003) ADVANCED SIGNAL PROCESSING TECHNIQUES FOR NOISE SOURCE IDENTIFICATION IN MINING EQUIPMENT. Master's Thesis, University of Pittsburgh.

Homison, Christopher Joseph (2006) Coupled Transport/Hyperelastic Model for High Energy Density Nastic Materials. Master's Thesis, University of Pittsburgh.

Huang, Hsiao-Ying Shadow (2004) Micromechanical Simulations of Heart Valve Tissues. Doctoral Dissertation, University of Pittsburgh.

Hudzik II, Alan Michael (2009) Hydrokinetic Oscillators for Energy Harvesting via Coupling Polyvinylidene Fluoride (PVDF) and Electromagnetics. Master's Thesis, University of Pittsburgh.

Hydrean, Christen McPhee (2009) Design and Development of a Novel Device for the Uniaxial Mechanical Analysis of Cerebral Artery Tissue. Master's Thesis, University of Pittsburgh.

I

Ikeda, Michael Kevin (2013) A Novel Multiple-Phase, Multiple-Component, Thermal Lattice Boltzmann Model. Doctoral Dissertation, University of Pittsburgh.

Ikeda, Michael Kevin (2011) Numerical Simulation of Vapor-Liquid Equilibria of a Water-Ethanol Mixture. Master's Thesis, University of Pittsburgh.

Issa, Roy Jean (2004) Numerical Modeling of the Dynamics and Heat Transfer of Impacting Sprays for a Wide Range of Pressures. Doctoral Dissertation, University of Pittsburgh.

J

Jacob, Doreen K (2004) ELECTRICAL STIMULATION OF MUSCLES WITH APPLICATION TO FACIAL PARALYSIS. Master's Thesis, University of Pittsburgh.

Juvelekian, Sarkis (2002) Volumetric Mass Flow Sensor for CPAP. Master's Thesis, University of Pittsburgh.

K

Karaivanov, Ventzislav (2009) LIFETIME PREDICTION MODELING OF AIRFOILS FOR ADVANCED POWER GENERATION. Doctoral Dissertation, University of Pittsburgh.

Kerzmann, Tony Lee (2010) Energy and Environmental Analysis of a Linear Concentrating Photovoltaic System. Doctoral Dissertation, University of Pittsburgh.

Kim, Sunghwan (2002) Low Power Energy Harvesting with Piezoelectric Generator. Doctoral Dissertation, University of Pittsburgh.

Kirsch, Nicholas (2012) Characterization of Periodic Disturbances In Rolling Element Bearings. Master's Thesis, University of Pittsburgh.

Knight, Ryan Robert (2007) The Analysis and Testing of MEMS and Macro Scale Piezoelectric Devices. Master's Thesis, University of Pittsburgh.

Knotts, Wesley Andrew (2011) Investigation of Thermal Semiconductors for Adaptive Heat Management in Buildings. Master's Thesis, University of Pittsburgh.

Kramer, Scott/J (2012) Finite Element Analysis of Graft Stress in Various Tunnel Positions for ACL Reconstruction. Master's Thesis, University of Pittsburgh.

Kristufek, Michael (2013) On The Use of Computational Fluid Dynamics for Evaluation of Nonlinear Hydrodynamic Galloping Energy Harvester Performance. Master's Thesis, University of Pittsburgh.

L

Landfried, Douglas Tyler (2013) Characterization of the Behavior of Confined Laminar Round Jets. Master's Thesis, University of Pittsburgh.

Larkin, Jason Michael (2009) Power-Law Distributions of Particle concentrations in Free-Surface Turbulence. Master's Thesis, University of Pittsburgh.

Li, Dalong (2010) Structural multi-mechanism model with anisotropic damage for cerebral arterial tissues and its finite element modeling. Doctoral Dissertation, University of Pittsburgh.

Li, Deyu (2003) VIBROACOUSTIC BEHAVIOR AND NOISE CONTROL STUDIES OFADVANCED COMPOSITE STRUCTURES. Doctoral Dissertation, University of Pittsburgh.

Li, Fang (2009) THE ACOUSTIC WAVE SENSOR AND SOFT LITHOGRAPHY TECHNOLOGIES FOR CELL BIOLOGICAL STUDIES. Doctoral Dissertation, University of Pittsburgh.

Li, Qiang (2003) Characterization of Failure Mechanisms in Cross Wedge Rolling. Doctoral Dissertation, University of Pittsburgh.

Lu, Yixin (2005) NUMERICAL SIMULATION OF A FLAT-TUBE HIGH POWER DENSITY SOLID OXIDE FUEL CELL. Doctoral Dissertation, University of Pittsburgh.

Luo, Junhang (2011) In-Situ TEM Study on the Mechanical Behavior of Nanowires. Doctoral Dissertation, University of Pittsburgh.

M

Magnusen, Joshua (2005) Design and Fabrication of an Elbow Motion Simulator. Master's Thesis, University of Pittsburgh.

Mang, Scott (2013) Investigation of Performance Evaluation and Design Techniques for Large Industrial Mufflers. Master's Thesis, University of Pittsburgh.

McAdams, Daniel (2013) Dynamic Maskless Holographic Lithography and Applications. Doctoral Dissertation, University of Pittsburgh.

McAdams, Daniel Robert (2009) Measuring Inter-Particle Forces at an Interface with Optical Tweezers and a Long Working-Distance Objective Lens. Master's Thesis, University of Pittsburgh.

McGinley, Katherine M. (2010) Functional Benefit and End-of-Life Analysis for Photovoltaic Fluorescent Concentrator Prototype. Undergraduate Thesis, University of Pittsburgh.

Mei, Junfeng (2005) FORMULATION AND PROCESSING OF CONDUCTIVE INKS FOR INKJET PRINTING OF ELECTRICAL COMPONENTS. Doctoral Dissertation, University of Pittsburgh.

Miller, Nicholas (2014) Optimization of Jet Impingement Channel for Near Wall Cooling in Gas Turbine Airfoils. Master's Thesis, University of Pittsburgh.

Miller, Veronica Bree (2010) Dynamic Modeling and Environmental Analysis of Hydrokinetic Energy Extraction. Doctoral Dissertation, University of Pittsburgh.

Mohaghegh Motlagh, Seyed Amin (2014) An Investigation in Structural Shape Morphing by Modulus Variation. Doctoral Dissertation, University of Pittsburgh.

Mohamed, Hassan (2013) Finite Element Analysis (FEA) Implementation of Thermal Barrier Coating (TBC) Lifetime Prediction Methods. Master's Thesis, University of Pittsburgh.

Mohebbi, Mahdi (2007) Large-eddy Simulation of NASA LaRC Coaxial He-O2/Air Jet. Master's Thesis, University of Pittsburgh.

Mohebbi, Mahdi (2013) Time-periodic solutions of magnetoelastic systems and embedding of the attractor of 2-dimensional Navier-Stokes equations into Euclidean spaces. Doctoral Dissertation, University of Pittsburgh.

Morrow, Clint Adam (2004) Adhesive Rough Surface Contact. Doctoral Dissertation, University of Pittsburgh.

Muriuki, Muturi (2004) AN INVESTIGATION ITNO THE DESIGN AND CONTROL OF TUNABLE PIEZOELECTRIC RESONATORS. Doctoral Dissertation, University of Pittsburgh.

N

Nik, Mehdi B. (2012) VS-FMDF and EPVS-FMDF for Large Eddy Simulation of Turbulent Flows. Doctoral Dissertation, University of Pittsburgh.

Ning, Xinguo (2002) Analysis of tribological performance in transversely isotropic materials utilizing analytical and finite element methods. Doctoral Dissertation, University of Pittsburgh.

O

O'Farrell, Madelyn Egan (2008) Femoral Fracture Risk Assessment Following Double-Bundle ACL Reconstruction. Master's Thesis, University of Pittsburgh.

Ojo, Olorunfemi B (2003) Effect of Penetrator configuration and size on the dynamic behavior of composite material under high strain rate loading. Master's Thesis, University of Pittsburgh.

Otis, Collin C. (2010) Comparative Assessment of Adaptive-Stencil Finite Difference Schemes for Hyperbolic Equations with Jump Discontinuities. Master's Thesis, University of Pittsburgh.

Otis, Collin C. (2013) High-Fidelity Simulation of Compressible Flows for Hypersonic Propulsion Applications. Doctoral Dissertation, University of Pittsburgh.

P

Pahk, Jae Bum (2007) Experimental study of pneumatic conveying by various methods of analysis. Doctoral Dissertation, University of Pittsburgh.

Palamara, Matthew James (2004) ELECTRICAL POWER GENERATION FROM NON-CONTINUOUS FLOW IN A SELF-CONTAINED BREATHING APPARATUS. Master's Thesis, University of Pittsburgh.

Pickel, Jason G (2010) Adaptive Control for the Position of Magnetic Particles using Magnetic Traps. Master's Thesis, University of Pittsburgh.

Pisciuneri, Patrick H. (2013) An Irregularly Portioned FDF Solver for Turbulent Flow Simulation. Doctoral Dissertation, University of Pittsburgh.

Pisciuneri, Patrick Henry (2009) Large Eddy Simulation of a Turbulent Nonpremixed Jet Flame Using a Finite-Rate Chemistry Model. Master's Thesis, University of Pittsburgh.

Q

Qin, Lifeng (2010) Modeling and Experimental Study of Bulk Acoustic Wave Resonator Sensor. Doctoral Dissertation, University of Pittsburgh.

R

Rauscher, Scott Gibson (2008) Testing and Analysis of Shape-memory Polymers for Morphing Aircraft Skin Application. Master's Thesis, University of Pittsburgh.

Redkin, Konstantin (2014) Development and Microstructural Improvement of Spin Cast High-Speed Steel Rolls. Doctoral Dissertation, University of Pittsburgh.

Rhudy, Matthew B (2010) Real Time Implementation of a Military Impulse Classifier. Master's Thesis, University of Pittsburgh.

Rodgers, Jesse Cemil (2005) ANALYSIS AND TESTING OF A THUNDER™ PIEZOELECTRIC ACTUATOR AS A PRIME MOVER IN A GAS FLOW CONTROL VALVE. Master's Thesis, University of Pittsburgh.

Ryan, Timothy S (2010) Design and Control of a Standing-Wave Thermoacoustic Refrigerator. Master's Thesis, University of Pittsburgh.

Ryu, KyungJoo (2008) MICRO PUMPING AND SEPARATING/COLLECTING PARTICLES USING OSCILLATING BUBBLES. Master's Thesis, University of Pittsburgh.

S

SIW, SIN CHIEN (2012) EXPERIMENTAL INVESTIGATION OF INTERNAL COOLING PASSAGES ON GAS TURBINE BLADE WITH PIN-FINS AND RIB-TURBULATORS. Doctoral Dissertation, University of Pittsburgh.

Schimoler, Patrick John (2008) Design of a Control System for an Elbow Joint Motion Simulator. Master's Thesis, University of Pittsburgh.

Shan, Zhiwei Steven (2005) IN SITU TEM INVESTIGATION OF DEFORMATION AND FRACTURE MECHANISM IN NANOCRYSTALLINE NICKEL. Doctoral Dissertation, University of Pittsburgh.

Shelton, Christopher and Vipperman, Jeffrey (2013) Six Noise Type Military Sound Classifier. Master's Thesis, University of Pittsburgh.

Sidorov, Sergey A (2007) Finite element modeling of human artery tissue with a nonlinear multi-mechanism inelastic material. Doctoral Dissertation, University of Pittsburgh.

Smith, Adam K (2006) Adaptive Resonant Mode Active Noise Control. Master's Thesis, University of Pittsburgh.

Soncini, Ryan (2014) Parameter Estimation via Bayesian Inversion: Theory, Methods, and Applications. Master's Thesis, University of Pittsburgh.

T

Tao, Zhenhua (2002) Friction Analysis and modeling in metal cutting processes at elevated temperatures. Doctoral Dissertation, University of Pittsburgh.

Tourkov, Konstantin (2013) Investigation of Thermoacoustic Performance of Standing and Traveling Wave Thermoacoustic Engines. Master's Thesis, University of Pittsburgh.

Turan, Fatih (2011) Effects of the Loading Direction and Contact Geometry on the High Strain Behavior of Woven Graphite/Epoxy Composites. Master's Thesis, University of Pittsburgh.

Tusnapuckdi, Ammata (2002) Heat Transfer in Non-Newtonian Fluid Flow from an Oblique Array of Plates of Unequal Length. Doctoral Dissertation, University of Pittsburgh.

V

Vaidya, Ashwin (2004) Orientation of Rigid Bodies Freefalling in Newtonian and Non-Newtonian Fluids. Doctoral Dissertation, University of Pittsburgh.

W

Wang, Chenzhi (2014) Finite Element Modeling of Blast-Induced Traumatic Brain Injury. Doctoral Dissertation, University of Pittsburgh.

Wang, Jingpeng (2008) Scale Formation of SOFC Metallic Interconnects in Coal Syngas. Master's Thesis, University of Pittsburgh.

Weir, David Michael (2010) Effect of Biceps Reattachment Location on Moment Arm. Master's Thesis, University of Pittsburgh.

Wulandana, Rachmadian (2003) A Nonlinear and Inelastic Constitutive Equation for Human Cerebral Arterial and Aneurysm Walls. Doctoral Dissertation, University of Pittsburgh.

Y

Yagodich, Matthew John (2003) Numerical Evaluation of Thin-Shelled Structural Panels. Master's Thesis, University of Pittsburgh.

Yang, Zhaochun (2006) POROVISCOELASTIC DYNAMIC FINITE ELEMENT MODEL OF BIOLOGICAL TISSUE. Doctoral Dissertation, University of Pittsburgh.

Yilmaz, Server Levent (2009) RANS/PDF and LES/FDF for Prediction of Turbulent Premixed Flames. Doctoral Dissertation, University of Pittsburgh.

Yuan, Peng (2006) THERMAL LATTICE BOLTZMANN TWO-PHASE FLOW MODEL FOR FLUID DYNAMICS. Doctoral Dissertation, University of Pittsburgh.

Z

Zangrilli, Ursula (2013) Multiscale Implications of Stress-Induced Ionic Polymer Transducer Sensing. Doctoral Dissertation, University of Pittsburgh.

Zeng, Zijing (2011) Novel methodologies for investigating the pathophysiology of cerebral aneurysms. Doctoral Dissertation, University of Pittsburgh.

Zhang, Tao (2005) VALVELESS PIEZOELECTRIC MICROPUMP FOR FUEL DELIVERY IN DIRECT METHANOL FUEL CELL (DMFC) DEVICES. Doctoral Dissertation, University of Pittsburgh.

Zhang, Zhijian (2011) Surface and Magnetic Polaritons on Nanodisk-Aligned Multilayer Structure. Master's Thesis, University of Pittsburgh.

Zhao, Minhua (2005) Nanomechanical and Electromechanical Characterization on Zinc Oxide Nanobelt Using Atomic Force Microscopy. Doctoral Dissertation, University of Pittsburgh.

Zhao, Yuejun (2008) MICROPARTICLE SAMPLING AND SEAPARATIONENABLED BY DROPLET MICROFLUIDICS. Doctoral Dissertation, University of Pittsburgh.

Zink, Florian (2010) Identification and Attenuation of Losses in Thermoacoustics: Issues Arising in the Miniaturization of Thermoacoustic Devices. Doctoral Dissertation, University of Pittsburgh.

This list was generated on Wed Jul 30 03:23:38 2014 EDT.