Zhong, Rong
(2010)
Microstructural Study of Laser-Induced Rapid Lateral Solidification of Metal Thin Films.
Doctoral Dissertation, University of Pittsburgh.
(Unpublished)
Abstract
Solidification is a common process used in the manufacture of bulk metals, and is fundamentally a phase transformation from liquid to solid that has been studied for many years. A lot of fundamental theories of solidification under near equilibrium conditions have been developed and are widely accepted. In the case of rapid solidification, which is characterized by rapid heat loss and a high interface velocity, non-equilibrium conditions prevail and are not yet understood very well. Due to the promising properties of new alloys and microstructures produced by rapid solidification, industrial interest in this process remains strong. As the present theories of solidification are mainly based on equilibrium conditions, there is strong motivation for developing new theories that explain the solidification behavior under non-equilibrium conditions. In this research, we present experimental results of rapid lateral solidification under the newly geometric heat flow and growth direction, and address critical questions associated with the current theories. This includes identification and quantification of mechanisms governing defect generation and texture formation.In this research, a pulsed excimer laser was applied as an energy source to melt thin film metallic multilayers of Cu, Cu-Nb, Ag and Au. This leaded to rapid resolidification upon cooling, and unique solidification microstructures. Using this technique, we were able to successfully prepare RLS (rapid lateral solidification) microstructures that were reproduceable and controllable through the laser process parameters. Much of the work presented here was an investigation of the rapid solidification process indirectly by examination of the post-solidified microstructure using electron microscopy. In this thesis we have quantitatively studied several aspects of the microstructure, including:•Microstructure of four zones formed during rapid solidification•Mechanism of texture selection•Stacking fault density versus solidification velocity It is believed that the microstructure and defects formed in rapid solidification are affected by the thermal gradient and by the high solidification velocity. Based on these experimental results, we are now able to address a number of open questions relating to orientation selection, kinetics of defect formation, S-L interfacial stability, and heat flow in RLS.
Share
| Citation/Export: |
|
| Social Networking: |
|
Details
| Item Type: |
University of Pittsburgh ETD
|
| Status: |
Unpublished |
| Creators/Authors: |
|
| ETD Committee: |
|
| Date: |
25 June 2010 |
| Date Type: |
Completion |
| Defense Date: |
6 April 2010 |
| Approval Date: |
25 June 2010 |
| Submission Date: |
9 April 2010 |
| Access Restriction: |
No restriction; Release the ETD for access worldwide immediately. |
| Institution: |
University of Pittsburgh |
| Schools and Programs: |
Swanson School of Engineering > Materials Science and Engineering |
| Degree: |
PhD - Doctor of Philosophy |
| Thesis Type: |
Doctoral Dissertation |
| Refereed: |
Yes |
| Uncontrolled Keywords: |
Ag; Au; Cu; Laser Melting; Rapid Solidification; Texture; Thin Films |
| Other ID: |
http://etd.library.pitt.edu/ETD/available/etd-04092010-151519/, etd-04092010-151519 |
| Date Deposited: |
10 Nov 2011 19:35 |
| Last Modified: |
15 Nov 2016 13:39 |
| URI: |
http://d-scholarship.pitt.edu/id/eprint/6937 |
Metrics
Monthly Views for the past 3 years
Plum Analytics
Actions (login required)
 |
View Item |
![[feed]](/images/feed-icon-32x32.png){kind=icon}