Link to the University of Pittsburgh Homepage
Link to the University Library System Homepage Link to the Contact Us Form

Mathematical Modeling of a Thermoelectric Generator Unicouple

Wielgosz, Sarah and Riley, Shane and Yu, Kevin and Durka, Michael and Bill, Nesmith and Drymiotis, Fivos and Fleurial, Jean-Pierre and Barry, Matthew (2022) Mathematical Modeling of a Thermoelectric Generator Unicouple. ASTFE Digital Library. pp. 115-132. ISSN 2379-1748

[img]
Preview
PDF
Download (1MB) | Preview

Abstract

To ascertain the simultaneous thermal and electrical performance of a thermoelectric (TE) unicouple with interconnectors, a thermal-electric coupled iterative mathematical model is introduced. The non-linear constitutive equations describing TE phenomena within the unicouple are linked to a thermal resistance network describing the interconnectors’ behavior. Thereupon, the thermal resistance of the interconnectors, and Joule heat generated within, are considered. Temperature dependent material properties are handled by integral-averaging techniques and an iterative solution methodology. Model form uncertainty is quantified by evaluating four unique analytic models. The first, the Implicit Thomson Model (ITM), considers the Thomson effect via integral averaging of the Seebeck coefficient. The second, the Explicit Thomson Model (ETM), decouples the Thomson effect from the Peltier effect; Thomson heat is explicitly solved using the Thomson coefficient. The third, the zT model, uses the figure of merit to describe the optimum efficiency-maximizing load resistance, and quantify device efficiency under maximum power scenarios. The last, the Differential Equation Model, does not assume distributions of Joule and Thomson heats to the cold- and hot-side interfaces as do the ITM, ETM and zT model. The predictive ability of each analytic model used within the unicouple-level model is compared to high-fidelity numeric results obtained from a three-dimensional, thermal-electric coupled model implemented in ANSYS CFX. Considering a range of hot-side unicouple temperatures, each analytic model exhibits agreement with one another, and with the numeric model. With increasing load resistance values, model form uncertainty and disagreement between analytic and numeric predictions decreases to a couple of percent at optimum operating points.


Share

Citation/Export:
Social Networking:
Share |

Details

Item Type: Article
Status: Published
Creators/Authors:
CreatorsEmailPitt UsernameORCID
Wielgosz, Sarahsaw179@pitt.edusaw179
Riley, Shanespr33@pitt.eduspr33
Yu, Kevinkevin.yu@jpl.nasa.gov
Durka, Michaelmichael.j.durka@jpl.nasa.gov
Bill, Nesmithbill.j.nesmith@jpl.nasa.gov
Drymiotis, Fivosfivos.drymiotis@jpl.nasa.gov
Fleurial, Jean-Pierrejean-pierre.fleurial@jpl.nasa.gov
Barry, Matthewmmb49@pitt.edummb49
Date: 2022
Date Type: Publication
Journal or Publication Title: ASTFE Digital Library
Publisher: Begel House Inc.
Page Range: pp. 115-132
DOI or Unique Handle: 10.1615/tfec2022.aae.040927
Schools and Programs: Swanson School of Engineering > Materials Science and Engineering
Refereed: Yes
Uncontrolled Keywords: thermoelectric generator, thermal-electric coupled modeling, analytic and numeric modeling
ISSN: 2379-1748
Official URL: https://dl.astfe.org/conferences/tfec2022,1ded32a8...
Article Type: Research Article
Date Deposited: 04 Nov 2022 19:08
Last Modified: 04 Nov 2022 19:08
URI: http://d-scholarship.pitt.edu/id/eprint/43789

Metrics

Monthly Views for the past 3 years

Plum Analytics

Altmetric.com


Actions (login required)

View Item View Item